Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Clock issue-Urgent- app 500 servers are affected.

All the servers have configured teh NTP server as local core switch ip at cincinatti NA.

Core switch itself configured teh NTP servers as Schaumberg switch ip.

when i checked teh ntp status at both schaumberg and cincinatti switches..i am having teh below error.But time at both switches is exactly showing.

Clock is unsynchronized, stratum 16, no reference clock

nominal freq is 250.0000 Hz, actual freq is 249.9978 Hz, precision is 2**18

reference time is CE70D244.2B189C90 (14:25:56.168 CDT Fri Oct 2 2009)

clock offset is 0.0315 msec, root delay is 24.81 msec

root dispersion is 50.06 msec, peer dispersion is 0.05 msec

error at server end is:

root@lnx102 ~]# ntpdate -q 10.9.0.2

server 10.9.0.2, stratum 16, offset 52.457689, delay 0.02585

12 Oct 08:24:26 ntpdate[15300]: no server suitable for synchronization found

[root@lnx102 ~]#

Please help me urgent in sync teh clock.

4 REPLIES
Community Member

Re: Clock issue-Urgent- app 500 servers are affected.

Please someone help..its priority 1 issue for us....more clients are affected

Hall of Fame Super Gold

Re: Clock issue-Urgent- app 500 servers are affected.

What's the result for the command "sh ntp a"? Can you post your NTP configuration including access list?

Bronze

Re: Clock issue-Urgent- app 500 servers are affected.

If it is that urgent, Cisco TAC is a better way to go than this forum.

HTH

Hall of Fame Super Gold

Re: Clock issue-Urgent- app 500 servers are affected.

This same question was posted in the WAN Routing and Switching forum where I posted a response asking for some additional information. If it is so urgent, why has there been no response to my post?

HTH

Rick

126
Views
0
Helpful
4
Replies
CreatePlease to create content