I have a 2821 router with a PRI from one carrier plugged into Controller T1 0/0/0, T1 (PtP) in 0/1/1, and a 2nd PRI from a different carrier plugged into Controller T1 0/3/0.
The 0/3/0 PRI is new and am bringing it up for testing. The service works but I am getting avg 900 slip seconds on it. Current clocking looks like this:
clock timezone EST -5
clock summer-time EDT recurring
no network-clock-participate slot 1
network-clock-participate wic 0
no network-clock-participate wic 1
network-clock-participate wic 3
network-clock-select 1 T1 0/0/0
I am unsure how to resolve. I do have a NM-HD-2V installed and unused in Slot 1 on the router. I was thinking of moving the VWIC2 card there along with the new PRI connection in hopes of creating a separate clocking domain, but unsure if that will work.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.