Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

co-existence of CBWFQ and POLICY BASED ROUTING

Both class based weighted faire queuing and policy based routing can co-exit on the sanme router interface?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: co-existence of CBWFQ and POLICY BASED ROUTING

Hello,

there should not be an issue, as CBWFQ is an output feature and PBR is an input feature and thus both are handling different traffic.

From another point of view: Routing comes first and queueing after the packet was routed to an output interface independantly from how it got there.

There might be hardware/software related exceptions, but the behaviour described above would generally be what you can expect.

Hope this helps! Please use the rating system.

Regards, Martin

1 REPLY

Re: co-existence of CBWFQ and POLICY BASED ROUTING

Hello,

there should not be an issue, as CBWFQ is an output feature and PBR is an input feature and thus both are handling different traffic.

From another point of view: Routing comes first and queueing after the packet was routed to an output interface independantly from how it got there.

There might be hardware/software related exceptions, but the behaviour described above would generally be what you can expect.

Hope this helps! Please use the rating system.

Regards, Martin

113
Views
0
Helpful
1
Replies
CreatePlease login to create content