AFAIK there are no commands on any switches specific for any ooperating system. Somehow I believe it can be compatibility issue between vista machine and the ethernet ports on line card on which you are connecting your vista machine.
I believe on same ports your XP clients are working fine correct? If possible try contacting Microsoft support and see if they have any known issues? Also if possible see any firewalls or antivirus on visa clients are degrading performance.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...