Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Command issue

Hi Team

please let me knoew the name of IOS image supporting ATTACHED COMMANDS.on L3 switch 6509 and 3745 router.

The existing IOS in switch is:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin"

The existing IOS in 3745 router is: c3745-ik9o3s-mz.123-12b.bin

Plse provide the IMAGE mname.

Regards

Vaibhav

5 REPLIES
Hall of Fame Super Silver

Re: Command issue

Hello Vaibhav,

I used command lookup tool searching

flow monitor command

Command History

Release

Modification

12.4(9)T

This command was introduced.

12.2(31)SB2

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2(33)SRC

Support for this command was added for Cisco 7200 series routers in Cisco IOS Release 12.2(33)SRC.

then using feature navigator

www.cisco.com/go/fn

the feature name is Flexible netflow

unfortunately c3745 is end of sale and the catalyst has to be verified but I'm afraid it doesn't support it.

for c3745 EOS bulletin

http://www.cisco.com/en/US/prod/collateral/routers/ps282/prod_end-of-life_notice0900aecd8072a6ad.html

for c3845 a suitable image is:

12.4(20)T1 ADVANCED SECURITY c3845-advsecurityk9-mz.124-20.T1.bin 256MB ram 64MB flash

the feature is supported on ISR routers and C7200 routers.

see

http://www.cisco.com/en/US/docs/ios/fnetflow/command/reference/fnf_01.html#wp1041339

I may be wrong but I think none of your two devices can implement flexible netflow.

Hope to help

Giuseppe

New Member

Re: Command issue

Hi hanks for the reply

thats mean their is no IOS available which can support these commands on 3745 router.

what about L3 switch their is any IOs availble in any feature set which cn support mentioned commnads.

Regards

Vaibhav

Hall of Fame Super Silver

Re: Command issue

Hello Vaibhav,

my understanding is that flexible netflow is only supported on software based routers up to now.

So I don't expect to see it supported on 12.2(33)SRC on sup720 c6500.

Next week I can try to see on one of our switches running 12.2(33)SRC but I don't think the command is there.

Hope to help

Giuseppe

New Member

Re: Command issue

Hi

I understand thats mean none of the mentioned two devices {switch and router)do not support the flow export and flow monitor commnads on any IOS version.

Plse confirm.

Regards

Vaibhav

Hall of Fame Super Silver

Re: Command issue

Hello Vaibhav,

unfortunately it is so: none of the two devices should support flexible netflow for different reasons as explained in previous posts

there is just a chance that last available IOS release for C3745 supports it.

Hope to help

Giuseppe

118
Views
0
Helpful
5
Replies
CreatePlease login to create content