07-16-2007 02:08 AM - edited 03-05-2019 05:18 PM
Please tell me the use of this command
channel-group 1 mode on and port channel 1
07-16-2007 02:25 AM
Hi
These commands are used to form an etherchannel which is a number of single links grouped together to form one large connection.
Portchannel 1 will the logical interface that represents the one large connection.
Channel-group 1 will be applied to the individual links eg
gi1/1
channel-group 1 mode on
gi1/2
channel-group 1 mode on
int gi1/3
channel-group 1 mode on
int po1
HTH
Jon
07-16-2007 05:38 AM
Yes.
Basically "channel-group 1 mode on" command ads an interface to a port channel number 1.
"port channel 1" is a name of a bundled interface to which all the added interfaces belong.
You can configure this interface by issuing
"interface port channel 1" command
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide