Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Command use

Please tell me the use of this command

channel-group 1 mode on and port channel 1

2 REPLIES
Hall of Fame Super Blue

Re: Command use

Hi

These commands are used to form an etherchannel which is a number of single links grouped together to form one large connection.

Portchannel 1 will the logical interface that represents the one large connection.

Channel-group 1 will be applied to the individual links eg

gi1/1

channel-group 1 mode on

gi1/2

channel-group 1 mode on

int gi1/3

channel-group 1 mode on

int po1

HTH

Jon

Silver

Re: Command use

Yes.

Basically "channel-group 1 mode on" command ads an interface to a port channel number 1.

"port channel 1" is a name of a bundled interface to which all the added interfaces belong.

You can configure this interface by issuing

"interface port channel 1" command

135
Views
0
Helpful
2
Replies
CreatePlease to create content