Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Commands

Dear Experts!

I Have to know where we use these Commands:

1)ip drp server

2)ip wccp web-cach

Multicast:

ip pim dm-fall-back

ip send-rp-announce Interface..

many 10xs

2 REPLIES

Re: Commands

IP drp server:- used for cisco distributed director generally on the 2500 series. The Director uses the DRP (director response protocol) for querying. The above turns the router into an DRP agent

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/distdir/2501/configuration/guide/ovr.html

Ip wccp web-cache: - Enables the WEB-cache service on the device. WCCP is a Cisco-developed content-routing technology that you can use to integrate cache engines into your network infrastructure. The cache engines transparently store frequently accessed content and then fulfill successive requests for the same content, eliminating repetitive transmissions of identical content from web servers

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_13_ea1/configuration/guide/swwccp.html

ip pim dm-fall-back: This command enables PIM dense mode fallback when the RP becomes unavailable

ip send-rp-announce Interface: - Used to configure a router to be a candidate RP for a particular multicast group.

HTH

Narayan

New Member

Re: Commands

many 10xs royalblues

109
Views
9
Helpful
2
Replies