Admins are generally considered to have access everywhere so maybe best as promiscuous.
If the other groups need to connect to each other then they need to be in a community.
Infrastructure generally do, and you could say they are trusted so why not place them in a single community.
If you don't want students to connect directly, place them in an isolated. I'd trust teachers even less :) The method to share files should be by file server.
Don't forget, subnetting and access control. I wouldn't recommend placing all devices in a single subnet. depends on how many you have, but certainly a subnet for end users (teachers, students) and infrastructure would be a good idea.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...