Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Compact Flash Issue Nexus 7018

(Nexus 7018)

When removeing a compact flash card from the standby supervisor located in module 10  it will not come back online when you reinsert the card.

For workaround.

To bring slot0: back online you need to perform the following steps:

1. execute a system switchover from the active supervisor (module 9) making the standby supervisor the active supervisor (module 10)

This results in no change in the online status of slot0: in module 10 (currently active)

2. From the active sup (module 10) execute a system switchover once the system switchtover is completed slot0: recovers and is back online.

We have populated 8G in the log flash reader slot & 2G in slot0: on both module 9 (active sup) and module 10 (standby sup)

Is this is expected behaviour ? any document ? should we always do this workaround to bring the Sup back online ?

Thanks,

AK

224
Views
0
Helpful
0
Replies
CreatePlease login to create content