Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

conexion vss 6506

hi for conexion vss two 6506 which is the conector or speed (10g or1g) Sfp or x2

What is the connection that allows vss

Sent from Cisco Technical Support iPad App

4 REPLIES

Re: conexion vss 6506

Hi,

First of all you will need Sup720-10G. Futhermore the VSL link is treated as a systems control link and encapsulates all traffic into a special system header called the Virtual Switch Header (VSH). This encapsulation is done via dedicated hardware resources and the VSL can only be configured on a 10-Gigabit interface with following hardware ports:

•Sup720-10G, 10-Gbps ports

•WS-X6708

•WS-X6716 (in performance mode only, requires 12.2(33)SXI)

All having 10Gbps and X2 modules

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/product_data_sheet0900aecd806ed759_ps708_Products_Data_Sheet.html

Dan

Bronze

conexion vss 6506

Supervisor 2T is also support VSS, as far as newest line cards.

Bronze

conexion vss 6506

Only 10G EtherChannel. You may use Supervisor ports or line card's ports (X2 or XENPAK) with some restrictions.

New Member

Re: conexion vss 6506

Tks had no found that specification

Sent from Cisco Technical Support iPad App

239
Views
0
Helpful
4
Replies
CreatePlease to create content