Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Configuration module supervisor Switch Catalyst 4500

Good afternoon I need a help regarding a switch catalyst 4500 with ios cat4500e-universal.SPA.03.02.00.XO.150-2.XO.bin

I need help in configuration modules 3 and 4 of supervision, the problem is that I need the 4-port module 3 are active but only the first turn on both the module 3 and the first port on the module 4.

please if anyone knows of this issue.

attachment of visualization:

CSFCoreCisco#show module

Chassis Type : WS-C4507R E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

1    18  10GE (X2), 1000BaseX (SFP)             WS-X4606-X2-E      JAE161102E8

2    18  10GE (X2), 1000BaseX (SFP)             WS-X4606-X2-E      JAE161102C5

3     6  Sup 7L-E 10GE (SFP ), 1000BaseX (SFP)  WS-X45-SUP7L-E     CAT1609L2GR

4     6  Sup 7L-E 10GE (SFP ), 1000BaseX (SFP)  WS-X45-SUP7L-E     CAT1609L2AH

5    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E    JAE1609037W

M MAC addresses                    Hw  Fw           Sw               Status

-- -------------------------------- --- ------------ ---------------- ---------

1 442b.037a.379a to 442b.037a.37ab 1.2                               Ok

2 442b.037a.32d2 to 442b.037a.32e3 1.2                               Ok

3 f0f7.553a.9cc0 to f0f7.553a.9cc5 1.1 15.0(1r)SG3  03.02.00.XO      Ok

4 f0f7.553a.9cc6 to f0f7.553a.9ccb 1.1 15.0(1r)SG3  03.02.00.XO      Ok

5 c464.13e1.ae06 to c464.13e1.ae35 1.0                               Ok

Mod  Redundancy role     Operating mode      Redundancy status

---- ------------------- ------------------- ----------------------------------

3   Standby Supervisor  SSO                 Standby hot

4   Active Supervisor   SSO                 Active

Everyone's tags (5)
1 REPLY
VIP Super Bronze

Configuration module supervisor Switch Catalyst 4500

Hi,

That is normal behavior.  Since you have SSO configured from the config guide:

When you use WS-X45-SUP7-E in RPR or SSO mode,  only the first two uplinks on each supervisor engine are available. The  second two uplinks are unavailable.

Here is the link for more info:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/01xo/configuration/guide/RPR.html#wp1097897

HTH

561
Views
0
Helpful
1
Replies
CreatePlease login to create content