Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration of Bridging and bvi interface

Hi,

which IOS version i need, to configure bridging on Catalyst 4506 and catalyst 3560, any link for download? How to configure the same ?

2 REPLIES

Re: Configuration of Bridging and bvi interface

It should work with your current version of IOS. I dont remember exactly, but it was avail from early 11.x series.

Here is the link for configuration:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca767.html

hope that helps.

pls rate all helpful posts.

Hall of Fame Super Silver

Re: Configuration of Bridging and bvi interface

Vineet

The configuration of bridging and of IRB which uses the BVI are for IOS based routers. I do not believe that you can do them on your 4506 and 3560 which are switches. The switches inherently support bridging (which they identify as switching - same function but different name) and I believe that they do not support BVI.

HTH

Rick

620
Views
4
Helpful
2
Replies
CreatePlease to create content