Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

configuration of switch

can we configure new switch without console cable.does switch have default ip and telnet enabled by default.

Everyone's tags (3)
2 REPLIES
Purple

configuration of switch

Hi,

no a switch doesn't have an IP configured by default and telnet is enabled but there is no password set nor any privileged enable password configured.

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
VIP Purple

configuration of switch

There is a different way to configure a new switch without the need for console-access. But you have to build a complete "Install-Infrastructure" for that so it's only worth the effort if there are many switches to install. The feature is named "Smart Install":

http://www.cisco.com/en/US/partner/docs/switches/lan/smart_install/release_12.2_55_se/configuration/guide/concepts.html

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
157
Views
0
Helpful
2
Replies
CreatePlease to create content