I have two switches 3550 WS-C3550-48-SMI with the versions of IOS Version 12,1 (13) EA1, Version 12,1 (19) EA1c had been added the interfaces fa0/38, fa0/39 and one of switches and in the other switch was configured the interface fa0/44, fa0/43 both in protocol PAGP with way desirable in each one of the interfaces in switches. These interfaces will go to be connected two pairs of radio that only work in way bridge, when the two pairs of wireless are connected the interface only drip a pair of wireless in the unit that I am, in the other unit do not only obtain to give ping in the other pair of wireless the same happen with the staff of the other unit, analyzing the interfaces see that fa0/38 input packets and fa0/43 output packets, only I only see also that fa0/39 and fa0/43 receives input packets and output packets normal. desire to receive an aid so that fa0/38, fa0/43 receives input packets and output packets normal. all interfaces are in up normal and green of link ok.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.