cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
234
Views
0
Helpful
1
Replies

configuration problem or ios "feature"?

danail-petrov
Level 1
Level 1

Hi there,

today i started some MPLS researches, however my problem is not concerned to MPLS. I start to configure one of our lab routers (you can find more information about it bellow) and i get this error:

cr1.SOF1(config)#int gi 3/39.100

cr1.SOF1(config-subif)#encapsulation dot1Q 100

cr1.SOF1(config-subif)#

cr1.SOF1(config-subif)#int gi3/38.100

cr1.SOF1(config-subif)#encapsulation dot1Q 100

Command rejected: VLAN 100 not available

More information about cisco device:

NAME: "1", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.3"

PID: WS-SUP720-3B , VID: V03, SN: SAL1121PM4L

NAME: "msfc sub-module of 1", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.6"

PID: WS-SUP720 , VID: , SN: SAL1121PHE0

NAME: "switching engine sub-module of 1", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.3"

PID: WS-F6K-PFC3B , VID: V01, SN: SAL1121PFB0

NAME: "3", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.5"

PID: WS-X6748-GE-TX , VID: V02, SN: SAL1120P6GQ

NAME: "switching engine sub-module of 3", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 3.1"

PID: WS-F6700-CFC , VID: V04, SN: SAL1119NKMA

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Wed 16-May-07 23:00 by kellythw

Image text-base: 0x40101040, data-base: 0x42A87FB0

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF9, RELEASE SOFTWARE (fc1)

System returned to ROM by reload (SP by reload)

System image file is "sup-bootdisk:s72033-ipservices_wan-mz.122-18.SXF9.bin"

cisco CISCO7604 (R7000) processor (revision 2.0) with 458720K/65536K bytes of memory.

Processor board ID FOX11170G0V

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

So i'm wondering is there any global config command to support this feature or what? I decided to try the SRB modification of this IOS but i have not had time to test it yet. So if anyone of you guys have an idea, please tell . I'll appreciate your help!!

Thanks in advance!

Kind Regards,

Danail Petrov

1 Reply 1

spremkumar
Level 9
Level 9

Hi Danail

This is normal behavior with any of the boxes we did try the same in some of our boxes (ME 6524) and went on with some workaround for the same..

regds

Review Cisco Networking products for a $25 gift card