Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure a Cisco 891 with a WorldWidePackets Lightning Edge at each end of a National Ethernet connection

I have to install 2 Cisco 891's, one at each end of a 'National Ethernet' connection provided by Virgin.

http://www.virginmediabusiness.co.uk/products__solutions/site_to_site_connectivity/national_ethernet.aspx

They have provided 2 WorldWidePackets Lightning Edge 46's, one at each end with a fibre link in the back and 4 ethernet ports in the front.

I need to configure the Cisco 891's to link the 2 sites together but also allow for internet access via a currently installed draytek router.

I believe that I need to configure the LAN port on the site's subnet and the WAN ports can be anything aslong as they are both on the same subnet (ie 10.10.10.1 and 10.10.10.2).

What would I need to do regarding routes?

Any help would be hugely appreciated.

Thanks

Andy

Everyone's tags (4)
1 REPLY
New Member

Re: Configure a Cisco 891 with a WorldWidePackets Lightning Edge

Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: 

http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.

THANKS

1798
Views
0
Helpful
1
Replies