configure control-plane on WS-C3560X-24 switch

[Joe Li]

Hello all, I have a problem copying an old switch (WS-C3560-G-24TS IOS12.2(35)) configuration to a new switch (WS-C3560X-24 IOS12.2(55)), I've been getting invalid input on the "control-plane" command. 

I've look up control-plane configuration but no luck on finding any solutions, any inputs would be very appreciated,  

Cheers all! 

[Reza Sharifi]

The 3560 and 3560G use a different software than 3560X.  Here is what is available on CCO for 3560 and 3560G

c3560-ipbasek9-mz.150-2.SE6.bin

http://software.cisco.com/download/release.html?mdfid=279486485&softwareid=280805680&os=&release=15.0.2-SE6&relind=AVAILABLE&rellifecycle=&reltype=latest&i=!pp

HTH