Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configure Etherchannel with Trunk port between switch and router

Hello Guys ,

I was wondering if there is possibility to condifure Etherchannel with Trunk port between switch and router , I know this can be done between switch-switch , but what about switch-router

regards,

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Configure Etherchannel with Trunk port between switch and router

Hi,

Depend on the router.  Not every router support it, but some do,

Have a look at this link for an example:

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094958.shtml

HTH

4 REPLIES
VIP Super Bronze

Configure Etherchannel with Trunk port between switch and router

Hi,

What type/model router?

New Member

Configure Etherchannel with Trunk port between switch and router

Hi ,

Actually I just wanted to know if that possible or not regardless type of router , since I've asked my teacher and said I'm not sure that possible because we need to configure IP address for each subinterface on the router !

thanks

VIP Super Bronze

Configure Etherchannel with Trunk port between switch and router

Hi,

Depend on the router.  Not every router support it, but some do,

Have a look at this link for an example:

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094958.shtml

HTH

New Member

Configure Etherchannel with Trunk port between switch and router

thanks deeply now I know it can be

regards

486
Views
0
Helpful
4
Replies