Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

configure SSH for 2960

Dear all

I want to configure ssh on 2960 switch,

my Ios is LAN base 12.2 FX

when i want to configure ssh on switch with crypoto command the commnad does not appear.

regards

4 REPLIES
New Member

Re: configure SSH for 2960

you are going to need an ipservices ios for ssh support.

New Member

Re: configure SSH for 2960

That's what happens when I reply first thing in the morning. Thanks for the correction Andy.

Re: configure SSH for 2960

There isn't an IP Services image for the 2960 as it is purely layer-2. You have the choice of LAN Lite or LAN Base (LAN Base having more features). By default the non-crypto image is installed in the Flash, if you want SSH you will need the crypto IOS image. Download the 'LAN BASE WITH WEB BASED DEV MGR' from CCO and upgrade your 2960 with this, you will then have SSH (& HTTPS) support. The latest release is 12.2(44)SE2.

HTH

Andy

Re: configure SSH for 2960

Hi,

you should have "K9" image installed, something like this c2960-lanbasek9-mz.122-25.FX.bin

Check the filename of the IOS, with "show version"

902
Views
5
Helpful
4
Replies