Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

configure timed access list

how to configure a timed access list in 3640 router


Re: configure timed access list

To create a TBACL you create a time range and at the end of the ACL you apply the time range to the ACL. Here is a guide to help you configure them.


Hall of Fame Super Blue

Re: configure timed access list


See this attached link which has full configuration details for time based acl's.


New Member

Re: configure timed access list

thanks for yr reply , but i have one doubt still , what will be the effect whem i permit a network to access after the time interval , is it will be denied


Re: configure timed access list

The network will be denied or permitted access based purely on the time range u allot for that parameter.

Depending on the will either deny or permit.In ur case, it will permit the n.w to access after the denial period is over.

Pls rate/mark if this helps!!!

New Member

Re: configure timed access list

i configured the time base access list , but i faild to get the output , here is the scenario , two routers connected serially and one fast ethernet to the lan , my acceslist confi r show n below

access-list 105 permit tcp time-range permit

acess-list 105 deny tcp time-range deny

time_range deny

absolute start 12:40 30 jun 2008 12:50 30 june 2008

time-range permit

absolute start 12:20 30 jun 2008 12:30 30 jun 2008

i applie it at the fa ethernet interface of router r1

but the pcs at ethernet is always denid to acces the network

pls tell me whats the reason

acess-list is not responding as per the time range

CreatePlease to create content