01-23-2007 03:44 AM - edited 03-05-2019 01:55 PM
Hi,
I have 2 3750s to be configured on a stack. Do i need to add configs on both the switches or jus stack them and configure as one single CLI?
Appreciate your response.
Regards
Navneet
01-23-2007 04:34 AM
It is one logical switch with 2 modules , make sure to specify which switch you want as stackmaster.
01-23-2007 04:48 AM
How would you make them appear as one switch ?
01-23-2007 06:31 AM
Carl,
When you configure the Stack and one switch master, form the master itself you can manager all the switches and configure them. You actually use the stackwise cable and connect it to the dedicated staking ports at the back of 3750 switches which makes them a single switch.You can configure switch clustering on above it so that you can manage all the switches using a single IP.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swstack.htm
HTH,
-amit singh
Please see the link below.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide