Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring a 2960 8 port switch with DHCP server

I need to configure a Cisco 2960 switch as a DHCP server.    The current IP address will be on a different seed than the DHCP addresses.  i.e.

Switch IP = 10.1.2.3, GW = 10.1.2.1, Subnet = 255.255.255.0

DHCP addresses would be 192.168.1.1 - 200, GW=???? (10.1.2.3?) and subnet would be 255.255.255.0

Anyone have a suggestion on documentation on doing this?

Thanks.

1 REPLY
Hall of Fame Super Gold

Configuring a 2960 8 port switch with DHCP server

ip dhcp excluded-address 192.168.1.201 192.168.1.253

!

ip dhcp pool BLAH

network 192.168.1.1 255.255.255.0

dns-server 1.2.3.4 7.8.9.10

default-router 192.168.1.1

1129
Views
0
Helpful
1
Replies