Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

configuring fast ethernet port

hi I am confused in configuring fast ethernet in the 2600 series router ,can you give exact command path for configuring ?

  • LAN Switching and Routing
2 REPLIES
Cisco Employee

Re: configuring fast ethernet port

Hi Ajay,

I am not sure what do you want to configure but if it is just a basic configuration then

Router#

Router#config t

Router(config)#

Router(config)#interface fa0

Router(config-if)#ip address x.x.x.x x.x.x.x

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#exit

Router#wr mem

Please update if you want to configure something specific?

HTH

Ankur

Cisco Employee

Re: configuring fast ethernet port

Please see the link below for configuring the interfaces on 2600 router.

http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_configuration_guide_chapter09186a008007e602.html#wp1021245

HTH,Please rate if it does.

-amit singh

354
Views
0
Helpful
2
Replies
This widget could not be displayed.