Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Configuring NAT on a WS-C3560G-48TS switch

In the event of our Cisco PIX failing we are preparing to recover our network. We only have access to our switches, so configuring NAT on the routers is not an option. Instead, we are looking in to the possibility of configuring our WS-C3560G-48TS, with the enhanced IOS, with NAT. Is this possible?

Thanks in advanced.

5 REPLIES
Hall of Fame Super Blue

Re: Configuring NAT on a WS-C3560G-48TS switch

Hi

Unfortunately not. Only the 6500 switch supports NAT at this current time regardless of what version of IOS you run on the 3560.

Jon

New Member

Re: Configuring NAT on a WS-C3560G-48TS switch

The last time I checked , 3560s donot do nat.

New Member

Re: Configuring NAT on a WS-C3560G-48TS switch

What if we use the cluster outside-interface command?

Re: Configuring NAT on a WS-C3560G-48TS switch

Still won't do NAT. You will need an external router or firewall to do NAT. No matter what you do to the switch it does not support NAT. See http://www.cisco.com/warp/public/473/166.html#topic1 (I think it was Jon pointed that out to me last week...)

New Member

Re: Configuring NAT on a WS-C3560G-48TS switch

Thanks a bunch, guys, for your help.

383
Views
20
Helpful
5
Replies
CreatePlease to create content