Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring NAT on SG500-28

Hi,

I have a new SG500-28 switch, I have a pool of 16 Public IPs. I have created vlans for all the departments and want to configure NAT using different public IP and limit the bandwidth for all the departments. How can I configure NAT?

  • LAN Switching and Routing
Everyone's tags (2)
3 REPLIES
Silver

Configuring NAT on SG500-28

No way. You need a router.

New Member

Configuring NAT on SG500-28

Hello Peter,

Is it possible with Catalyst 3560V2 24

Purple

Configuring NAT on SG500-28

No,

The only switches supporting NAT are the 6500,6000 and 5500

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a008011c629.shtml

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
1016
Views
0
Helpful
3
Replies
This widget could not be displayed.