I'm having trouble getting the 6509 sup2 running hybrid mode to tag packets correctly. It's running 6.4.9 code and all I really need it to do is mark packets matching one ACE keyword (a given source subnet) to dscp 0 and packets matching another ACE keyword (ip any any (all other packets received)) in the same ACL to dscp 24. It seems that it marks all packets received, even those that match the subnet ACE with a dscp value of 24. Any help would be appreciated.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...