Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Configuring SNMP Version 3

I am trying to setup SNMP v3 on a 4948E switch here is what I have done so far:

snmp-server location "location"

snmp-server contact IT Admins

snmp-server group SNMPgrp v3 priv read SNMP-ro write SNMP-rw access 80

snmp-server user snmp_user SNMPgrp v3 auth sha xxxxxxxxx priv aes 128 xxxxxxxx access 80

What else am I missing and how can I confirm that it is configured correctly?

Everyone's tags (4)
2 REPLIES
New Member

Configuring SNMP Version 3

Hi Mohammad

You also need to specify :

snmp-server view "nameofview" "MIB view family name" included

snmp-server host x.x.x.x (snmp server ip address) version 3 auth "specify your user"

Regards

Silver

Re: Configuring SNMP Version 3

Hi Mohammad,

you can try something like this

snmp-server community RO  --its good to use RO access not RW

snmp-server location

snmp-server contact

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps transceiver all

snmp-server enable traps tty

snmp-server enable traps cluster

snmp-server enable traps cpu threshold

snmp-server enable traps vtp

snmp-server enable traps port-security

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps storm-control trap-rate 100

snmp-server enable traps power-ethernet group 1

snmp-server enable traps power-ethernet police

snmp-server enable traps fru-ctrl

snmp-server enable traps syslog

snmp-server enable traps mac-notification change move threshold

snmp-server enable traps errdisable

snmp-server host ver 3 auh< password>

snmp-server host ver 3 auh< password>

hope this will help.

please rate if this helps.

thanks

936
Views
5
Helpful
2
Replies
CreatePlease login to create content