Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

configuring SNMP

please how do i configure my cisco router to be sending SNMP traps to my monitoring software OMNIVISTA

3 REPLIES
Bronze

Re: configuring SNMP

access-list 1 permit 10.10.10.10

snmp-server trap-source loopback0

snmp-server community xxxxxx RO 1

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

you can add more to the snmp traps

Hall of Fame Super Silver

Re: configuring SNMP

Olakunle

configuring the access list and the snmp-server community are needed for the SNMP server to poll the router but are not necessarily needed to send traps. The other thing that is necessary to configure is:

snmp-server host

HTH

Rick

Bronze

Re: configuring SNMP

Yes, I forgot to add the snmp-server there :-). And yes, the ACL is not needed but I used :-)

523
Views
0
Helpful
3
Replies
CreatePlease to create content