cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
650
Views
0
Helpful
4
Replies

configuring vlans and trunking on a 1900 switch

carl_townshend
Spotlight
Spotlight

Can anyone tell me the easy way of doing this and if its possible ?

cheers

Carl

4 Replies 4

mahmoodmkl
Level 7
Level 7

Hi Carl

u can create vlans from config mode.

As per trunks u have to go into the interface mode and use

trunk on command.

Thanks

Mahmood

thanks, can you give me the command for this ?

cheers

Carl

Hi Carl,

Cat1924-EN#configure terminal

Cat1924-EN(config)#vtp domain DOC

Cat1924-EN(config)#vtp client

Cat1924-EN(config)#int fast0/27

Cat1924-EN(config-if)#trunk desirable

Check this link for trunk configuration on 1900 with 6500

http://www.cisco.com/en/US/tech/tk389/tk390/technologies_configuration_example09186a0080143c38.shtml#configs

VLAN/VTP configuration guidelines

http://www.cisco.com/en/US/tech/tk389/tk689/tech_configuration_guides_list.html

HTH, rate if it does

Narayan

Hi Carl,

I believe you must be having a Menu based 1900 switch if yes have a look at this link which will guide you how to configure vlan and trunk from different menu based options

http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v9x/ee_scg/1vlans.htm#xtocid2880523

HTH

Ankur

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco