Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Webcast- Automate Nexus9k

Highlighted
Community Member

Connect 2 networks

So I am having an issue, which I have inherited but believe I connected correctly. 

 

Network 1:

192.168.110.0 through 192.168.160.0.

Each VLAN has their own Layer 3 SG300 switch connects to SG500 switch at 192.168.100.4 which is connected to a Sonicwall at 192.168.100.1. 

 

Network 2 (Old Vendor not communicative with their specific routes):

172.28.14.0/24

172.28.14.254 gateway and router with an interface LAN1 of 192.168.150.58

Server on 172.28.14.243

 

What i need is to access 172.28.14.243 from the 192.168.0.0 network. 

 

I have a physical line from 192.168.160.0 switch to the Network 2 router at LAN1, the port it is pluggeg into has a 150 vlan. 

 

I have a static route in the sonicwall that says 172.28.14.0/24 is accessible via gateway 192.168.150.58. Am I missing something?

 

I think i diagrammed what i am trying to get across.

125
Views
0
Helpful
0
Replies
CreatePlease to create content