07-25-2014 09:18 AM - edited 03-07-2019 08:11 PM
Scenario:
A 4507 in data closet 1 is connected to a 6513 in data center. This is a layer 3 connection. I want to connected a 3750 in data closet 2 to the 4507 in closet 1. This will be a layer 2 connection. The mgmt ip of the 3750 will be from a vlan created on the 4507. I do not get a link light. I have traded out gbics and fiber patch cables. Does anyone know what I am missing?
07-25-2014 05:08 PM
Hi,
You are trying to run a 10G interface at 1G
You already have a 10G interface in slot 3 as a 10G.
Try ading thi to your config
!
hw-module uplink select all
!
Read this reference
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/command/reference/cmdref/ch2a_ins.html#wp1505563
Hope this helps
Regards
Alex
Please rate useful posts
07-28-2014 07:46 AM
Thanks for your reply. I don't have the option of selecting 'all'. I can only select 10G or 1G. I want to only use one interface(3/6) for the uplink to a 1G switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide