Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

connect on 22 port through PAT

Cannot connect on 22 port through PAT on router. I have next schema:

router.JPG

In log on ASA:

logASA.JPG

In log on Router:

*Aug  6 08:54:36.602: IP: s=5.5.5.6 (GigabitEthernet0/0), d=10.10.10.254, len 60, input feature
*Aug  6 08:54:36.602:     TCP src=44763, dst=22, seq=4072024705, ack=0, win=5840 SYN, MCI Check(66), rtype 0, forus FALSE, sendself FALSE, mtu 0, fwdchk FALSE
*Aug  6 08:54:36.602: FIBipv4-packet-proc: route packet from GigabitEthernet0/0 src 5.5.5.6 dst 10.10.10.254
*Aug  6 08:54:36.602: FIBfwd-proc: Default:10.10.10.254/32 recieve entry
*Aug  6 08:54:36.602: FIBipv4-packet-proc: packet routing failed

*Aug  6 08:54:36.602: IP: tableid=0, s=5.5.5.6 (GigabitEthernet0/0), d=10.10.10.254(GigabitEthernet0/0), routed via RIB
*Aug  6 08:54:36.602: IP: s=5.5.5.6 (GigabitEthernet0/0), d=10.10.10.254(GigabitEthernet0/0), len 60, rcvd 3
*Aug  6 08:54:36.602:     TCP src=44763, dst=22, seq=4072024705, ack=0, win=5840 SYN
*Aug  6 08:54:36.602: IP: s=5.5.5.6 (GigabitEthernet0/0), d=192.168.15.254, len 60, stop process pak for forus packet
*Aug  6 08:54:36.602:     TCP src=44763, dst=22, seq=4072024705, ack=0, win=5840 SYN

where I could be wrong?

1 REPLY
New Member

Re: connect on 22 port through PAT

ip route 0.0.0.0 0.0.0.0 10.10.10.253 solved my problem. Can anybody explain, in configuration file I have ip default-gateway 10.10.10.253(local address of ASA), ip routing is disabled on the Cisco router, I don't have access on router, but when I use ip route 0.0.0.0 0.0.0.0 10.10.10.253, access is opening.

322
Views
0
Helpful
1
Replies