Re: Connect three roters by serial ports - 10.0.0.0/8
Hello KS3 good afternoon!
Why are you using /8? you can use /30 for all your point to point conections, so you can use 10.0.0.0/30 (10.0.0.1 & 10.0.0.2) for the first point to point 10.0.0.4/30 (10.0.0.5 & 10.0.0.6) for the second and 10.0.0.8 (10.0.0.9 & 10.0.0.10) for the last one.
----Do not forget to rate useful post and/or mark the answers as a correct.----
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...