Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connect two independent 3750

Is it possible to connect a WS-C3750G-12S-S (Fiber) with a WS-3750G-24TS (Copper) via the StackWise cable ?

The purpose is to connect the end devices of the "copper" switch with the fiber backbone of the "fiber" switch.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Connect two independent 3750

Yes, you can certainly connect 2 two switches via stackwise connectors.The Catalyst 3750-12S switch supports desktop and aggregator Switch Database Management (SDM) templates. All other Catalyst 3750 switches support only the desktop SDM templates. So you have to run desktop SDM on both the switches to connect them. Make sure that you have the IOS software version running on both the switches.

Please go through the link below for more info:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225se/3750scg/swstack.htm#wp1189523

HTH, Please rate if it does.

-amit singh

Purple

Re: Connect two independent 3750

That is exactly what the stack cable is for , this makes it a stack and you use a single ip address to manage the stack .

2 REPLIES
Cisco Employee

Re: Connect two independent 3750

Yes, you can certainly connect 2 two switches via stackwise connectors.The Catalyst 3750-12S switch supports desktop and aggregator Switch Database Management (SDM) templates. All other Catalyst 3750 switches support only the desktop SDM templates. So you have to run desktop SDM on both the switches to connect them. Make sure that you have the IOS software version running on both the switches.

Please go through the link below for more info:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225se/3750scg/swstack.htm#wp1189523

HTH, Please rate if it does.

-amit singh

Purple

Re: Connect two independent 3750

That is exactly what the stack cable is for , this makes it a stack and you use a single ip address to manage the stack .

195
Views
0
Helpful
2
Replies
CreatePlease login to create content