Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting HP flex-10 10gb CX4 to 6509

I'd like to utilize the 10gb port on the HP flex-10 to connect to my 6509-E.

On the 6509-E, I have dual WS-SUP720-3B with a WS-x6516a-GBIC module.

Is it possible? If so, what will be required.

Many Thanks,

AG

4 REPLIES
VIP Super Bronze

Re: Connecting HP flex-10 10gb CX4 to 6509

Hi AG,

Yes it is possible.  On the HP the connector type is SFP and on the 6500 the connector type is SC, so you need an LC to SC fiber patch cord to connect the HP to Cisco. If the distance is short you need SR type Connector and cable if the distance is long then you need LR type connector and cable.

HTH

Reza

New Member

Re: Connecting HP flex-10 10gb CX4 to 6509

To the 10gb ports on sup720?

ws-x6516a-gbic doesnt support 10gb

New Member

Re: Connecting HP flex-10 10gb CX4 to 6509

The sup is WS-SUP720-3B no 10gb ports.

Hall of Fame Super Gold

Re: Connecting HP flex-10 10gb CX4 to 6509

Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

Don't forget to rate useful posts.  Thanks.

1847
Views
4
Helpful
4
Replies