chandru.j wrote:
Hi all,
One of my customer place they have 7600 router with E1 SPA card and other branch they have 2800 router with serial interface. ISP ask me to configure the E1 has unframed and clock is line. Can any body help me out in this.
Try this config assuming SPA is installed in sub-slot 0 of a SIP-200 in slot 3 and the E1 is port 0:
!
card type e1 3 0
!
controller E1 3/0/0
channel-group 0 unframed
!
interface serial 3/0/0:0
ip address x.x.x.x y.y.y.y
no shut
!
Atif