Here is my issue. This is my first metro ethernet connection.
Site A (1) Cisco 3750X connected to ethernet to media fiber converter. IP 10.0.8.1 vlan 8
Site B (1) Cisco 3750X connected to ethernet to media fiber converter. IP 10.0.8.2 vlan 8
Site A will come up
Site B line will come up, protocol is down
Originally the metro E was connect to two juniper firewall and it worked. Got rid of one firewall and wanted the routing to be on the Cisco switches instead of the junipers. Site A is currently connected to the cisco and Site B to a Juniper Firewall as I cant get it to come up on the switch.
Site A
interface Vlan8
ip address 10.0.8.1 255.255.255.0
interface GigabitEthernet1/0/7
description UPLINK_TO_METRO_ETHERNET
switchport access vlan 8
power inline never
spanning-tree portfast disable
Gi1/0/7 UPLINK_TO_METRO_ET connected 8 a-half a-100 10/100/1000BaseTX
Site B
interface Vlan8
ip address 10.0.8.2 255.255.255.0
interface GigabitEthernet1/0/3
description UPLINK_TO_METRO_ETHERNET
switchport access vlan 8
power inline never
spanning-tree portfast disable
I have tried this as a trunked interface also with the same result. Also when i go 100/full the line goes down but on the juniper it works.
Any input is welcome.
