Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Connection fex N2K-C2232PP-10GE to a Nexus 7000

Hi All,

 

I have a question concerning a N2K-C2232PP-10GE .

We have 2 nexus 7000 chassis with several N2K-C2248TP-1GE fexes. Now we want to connect a N2K-C2232PP-10GE .

 

What's the correct way to connect this type of fex. The same manner as a N2K-C2248TP-1GE?

Since vpc with a fex is not yet possible on the nexus 7000. We would have to connect the fex on a single chassis.

Like the other fexes I would like to connect it to 2 different line cards (N7K-F248XP-25) in the same N7K chassis.

Do I use 4 ports on the first N7K-F248XP-25 card and 4 on the second N7K-F248XP-25 card? Linked to 8 ports on the N2K-C2232PP-10GE? We have 8 twinax cables for uplink.

Thanks for your help,

 

Best Regards,

Joris

1 REPLY
Cisco Employee

Hi Joris,I see the same

Hi Joris,

I see the same questions was answered already:

https://supportforums.cisco.com/discussion/12140711/connection-fex-n2k-c2232pp-10ge-nexus-7000

 

HTH

Regards

Inayath

64
Views
0
Helpful
1
Replies
CreatePlease to create content