Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Connectivity Issues with HP BL460c Blade Center

Hi all,

I have an HP BL460c blade center connecting to a 6509 via two separate LACP etherchannel groups, each group with two 1GB links to a 48-port module in the 6509. I am experiencing connectivity issue with the blade server trying to talk to other non-blade server on the same VLAN, connecting to the same 48-port module in the 6509. From the blade server I can not ping some of the servers (not all) that are connected on the same VLAN, on the same 48-port module in the 6509 but I can ping any other servers on the same or different VLAN that are connected to different  48-port module.

Has anyone run into this scenario with blade server and 6509 connecting via LACP etherchannel ?

Thanks in advance for any inputs/suggestions !!!

D.

243
Views
0
Helpful
0
Replies