Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

connectivity problem

Hi everyone,

please am having issues establishing connectivity between the two locations as shown below,i would like to know why the second inteface (B-R2) is showing up up without ip address assigned to it.could be the reason why connection cannot be established.

thanks

B- R1

Serial0/3/1:0 10.99.4.46 YES NVRAM up up

interface Serial0/3/1:0

ip address 10.99.4.46 255.255.255.252

B- R2:

serial0/3/1:0 unassigned YES NVRAM up up

interface Serial0/3/1:0

no ip address

sa-R1:

serial0/3/0:0 10.99.4.121 YES NVRAM up up

interface Serial0/3/0:0

ip address 10.99.4.121 255.255.255.252

SA-R2:

Serial0/3/0:0 10.99.4.125 YES manual up up

interface Serial0/3/0:

ip address 10.99.4.125 255.255.255.252

1 REPLY

Re: connectivity problem

hi

can you post the output of show interface here ?

Can you also post the output of show running config of the router ?

regds

104
Views
0
Helpful
1
Replies