Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep with expired managed timer 44F2CD70, time 0x11CE4BE8 (00:00:00 ago). -Process= "L2MM", ipl= 4, pid= 105 -Traceback= 0x4101CA0C 0x41E13C48 0x41E1407C 0x404C632C.

Hi All,

Need a little Help !

I have a Cisco 2811 fa0/1 configured for DHCP connected to a Motorola Surfboard cable Modem (SB4100).

The FA0/1 is constantly dropping during the day, the longest period the connection stays up for is around 50 minutes.

I work from home during the Day and constantly access my companies intranet, using an SSLVPN. I also use Webex sessions during the day.

However the Irony is the connection is ok in the evening, when I have no need to access SSLVPN or Webex.

I thought i may have a faulty port, therefore I have already swapped ports but this makes no difference.

Also I'm constantly receiving the following error: %SCHED-3-STUCKMTMR: Sleep with expired managed timer 44F2CD70, time 0x11CE4BE8 (00:00:00 ago). -Process= "L2MM", ipl= 4, pid= 105 -Traceback= 0x4101CA0C 0x41E13C48 0x41E1407C 0x404C632C.

Your help is appreciated, Config file attached.

Regards

Charles

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep w

Looks like CSCsc62064. You may want to upgrade to one of the newer 12.4 releases (Looks like you are running 12.4-13b)

4 REPLIES
Cisco Employee

Re: Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep w

Please provide the output of show ver.

Regards,

jerry

New Member

Re: Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep w

Here you Go

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ094572TX
18 FastEthernet interfaces
13 Serial interfaces
1 Channelized E1/PRI port
2 Voice FXO interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Bridgewood-2811#sh flash
-#- --length-- -----date/time------ path
1     26725176 Nov 27 2005 15:55:26 +01:00 c2800nm-spservicesk9-mz.123-11.T8.bin
2         1532 May 6 2010 07:51:10 +01:00 nvram
3     31584992 May 6 2010 08:15:02 +01:00 c2800nm-ipvoicek9-mz.124-13b.bin
4         1200 Aug 16 2010 01:56:38 +01:00 vlan.dat
5        17902 Aug 15 2010 23:22:34 +01:00 Startup_15-08-2010
6        17381 Jul 12 2010 21:41:02 +01:00 BRIDGEWOOD-2811-12-07-2010

5652480 bytes available (58363904 bytes used)

Bronze

Re: Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep w

Looks like CSCsc62064. You may want to upgrade to one of the newer 12.4 releases (Looks like you are running 12.4-13b)

New Member

Re: Constantly receiving the Error:s %SCHED-3-STUCKMTMR: Sleep w

Thanks Vijay,

I have upgraded the IOS and the issue is now resloved.

IOS installed "c2800nm-ipvoicek9-mz.124-25c.bin".

Cheers

Charles

736
Views
0
Helpful
4
Replies
CreatePlease to create content