We're planning for the deployment of CoPP / CPPr. Can anyone post a link to the control plane size for a 4500s with a SUP V-10ge?
I realize it doesn't necessarily matter to setting up a config (I'm not trying manage *everything* on the control plane), but it keeps coming up in conversation and I'm not having any luck finding it in the docs (unless it's there under a different name?).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...