Looking for a way to identify traffic reaching the deny ip any any of the policy-map contyrol-plane policing feature.
When implementing Control-Plane policing, as the traffic reaches the router (Control-Plane) the applied acl either permits the traffic or filters the traffic down through the applied acl until it reaches the deny ip any any line. All traffic that reaches the deny IP any any is passed onto the next level of classification. I tried to add the "log" to the end of the deny IP any any to identify the traffic but turns out the "log" keyword is not permitted in the service policy acl.
Does anyone know how to identify traffic within the policy-map Control-plane policing?
class-map match-any COPP_4
match access-group name IMPORTANT
police 256000 4000 conform-action trasnmit exceed-action drop
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.