Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Converter CatOS to IOS Config

Hello, where can i find a Tool wich converts the config of a CatOS to a IOS config? Thx

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Converter CatOS to IOS Config

Hello Marcus,

here is a link to the EDI tool.

www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml

to download it you need a valid CCO account see the link inside the document.

https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=ccu-forum

( registered customers only) .

However, it is better to perform the conversion manually this is the most preferred way in order to have a better control of what is configured.

This is the opinion of many forum members.

I did some conversions without using the EDI tool.

Hope to help

Giuseppe

1 REPLY
Hall of Fame Super Silver

Re: Converter CatOS to IOS Config

Hello Marcus,

here is a link to the EDI tool.

www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml

to download it you need a valid CCO account see the link inside the document.

https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=ccu-forum

( registered customers only) .

However, it is better to perform the conversion manually this is the most preferred way in order to have a better control of what is configured.

This is the opinion of many forum members.

I did some conversions without using the EDI tool.

Hope to help

Giuseppe

218
Views
0
Helpful
1
Replies
CreatePlease to create content