Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Converting 6509 to IOS

I am preparing to convert a 6509 from CatOS to IOS. I was wondering if anyone knows if there is a way to convert back from IOS to CatOS?

Thanks,

Jack

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Converting 6509 to IOS

Hi Jack,

Here you are both:

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml

HTH,

Mohammed Mahmoud.

1 REPLY

Re: Converting 6509 to IOS

Hi Jack,

Here you are both:

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml

HTH,

Mohammed Mahmoud.

265
Views
0
Helpful
1
Replies
CreatePlease to create content