Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Converting Nexus 2000 FEX from Multihomed to Single Homed

Greetings!

Our architecture is using the FEX in dual-homed mode. a vPC is configured between 5K and 2K, and we have some port channel for servers connected on the FEX.

We'd like to move from this architecture to single-homed. I found a lot docs and posts on the configurations for one or the other. But nether from dual to single.

Someone has already done this? or what the way to do it.

With my understanding, now we have to move the config between 5K to 2K to port channel and not vPC and change the port channel on the FEX to vPC.

I've tried yesterday to remove the vPC between 5K and FEX. I didn't able to do it.  

I didn't have to much time to spend on (maintenance windows ( limited time))  and can really play on a production network.

I don't have no production switches to play with to find out the solution.

 

Thank you for your help!

62
Views
0
Helpful
0
Replies
CreatePlease to create content