We have regular vlans configured on our switches. We now have a requirement to segregate one of our VLAN to a private VLAN.
If we have to convert the regular VLAN to a private primary VLAN and then create secondary VLANs beneath it. Will the existing inter-vlan communication be affected. once changed will the private-primary vlan be able to communicate to other regular VLANs as before
Also what are the other issues I need to be aware of if I convert a regular VLAN to a private primary VLAN
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...