Copy FLASH to USBFLASH0...Simple Question need answered
I would like to copy all folder/files from flash to usbflash. When I receive a new router to configure, I would like to use my usb-stick to copy everything from flash, including that ccpexp folder with many sub-folders, to my usb. Can someone assist with how to perform or options?
Ah...I tried that several times with nno luck. This should be an easy thing to due. I know someone will tell me to use ftp or tftp but I really don't think I have to if the router has a usb port. Doing files individualy will work, but if a router has many files in flash then a simple COPY command should be enough. Am I missing something?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...