Copy the startup-config from a IOS switch to a tftp-server using SNMP

[karl.dorme]

I think I have read somewhere that it is possible to make a copy of the startup-config of a switch to a tftp server, using SNMP (via snmpset command).

Anybody who could help me ?

[purohit_810]

Instead of config t ..... use Config net command to save configuration direct at tftp server.

You can look out same on following link,

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_r/frprt2/frmemory.htm

Regards,

Dharmesh Purohit